SpotOptics Wavefront Sensor – home -> products -> optino -> overview


The software people for optics

Optino wavefront sensor - Workhorse for laboratory use and for field applications

overview

models

home -> products -> optino -> overview

Optino-Overview

SpotOptics Optino wavefront sensors based on Shack-Hartmann principle is the workhorse for laboratory use as well as for field applications

Optino wavefront sensor based on Shack-Hartmann principle gives you the all the information you would expect from a wavefront analyzer

3 sets of Zernike polynomials (Annular, Standard, Fringe) and Seidel polynomials can be fit to the data
More than 50 Zernike coefficients
Wavefront, spot diagram
MTF, PSF, EE, Strehl ratio and more
Alignment of complex optical systems
Focal ratios from f/0.5 up to f/500
Optical elements of practically any diameter and nature (diverging or converging) can be tested with a simple modification of the light source and with the use of our optional Beam-expander unit
Wavelength range from UV to IR by changing the camera
Test at any wavelength by inserting filters
Optino wavefront sensor based on Shack-Hartmann principle comes with its own calibration source, making it possible to achieve high accuracy (any auxiliary optics can be calibrated out)
Optino wavefront sensor based on Shack-Hartmann principle can be used over a large range of temperature making it feasible for field applications
Guaranteed parallel light for every wavelength with motorized collimator
Save time as alignment of Optino as well as bringing it to the correct focus can be obtained in a matter of few seconds
The MTF can also be visualized in real-time
Save time with real-time alignment and optimization of optical systems
SensoftOptino: the GUI Shack-Hartmann wavefront sensor control and analysis software
Customized solutions

Four wavefront sensors models to cover different needs

Models		Features
Omi wavefront sensor		This is the basic low-cost system wavefront sensor based on the Shack-Hartmann principle
Optino Uno wavefront sensor		This is the basic wavefront sensor system based on the Shack-Hartmann principle , with a fixed collimator for the light source. It has all the basic functions you will need for optical analysis, including a fiber-optic light source
Optino Professional Version (Optino Pro wavefront sensor)		Like Optino Easy Sensor, wavefront sensor based on the Shack-Hartmann principle, but with a motorized collimator and advanced software functions, and a higher degree of automation
Optino Engineering Version (Optino EE wavefront sensor)		Like Optino Pro, wavefront sensor based on the Shack-Hartmann principle, but with more advanced software features and optimized for the manufacturing environment. It can be used in a feed back loop, and can make a measurement of the optical quality with a frequency of about 10 Hz
Optino+ Beam profiler		Like Optino Pro, wavefront sensor based on the Shack-Hartmann principle, but with a second camera that works as built-in beam-profiler. Laser beam aberrations and characterization can be obtained with the same instrument